List of Equipment

LIST OF PLANT FABRICATION, ERECTION & INFRASTRUCTURE PROJECTS COMPLETDE BY HIGHSPEED SHIPBUILDING & ENGINEERING CO. LTD. INDEPENDENTLY AND IN COLLABORATION WITH MULTINATIONAL PRIME CONTRACTORS FROM JAPAN, KOREA AND EUROPE.

01.          GAS TURBINE (35MW) FABRICATION MODIFICATION & ERECTION PROJECT AT BHOLA
               (Under contract from Untrue Resources Ltd.) 2009- onwards.

02.          40 (20+20) MW GAS GENSET INSTALLATION PROJECTS AT BOGRA
               (Under contract from G88 & HOSAF ) 2008

03.          FABRICATION & ERECTION OF PROCESS HOUSE OF SUGAR REFINERY
               (Under Contract From Abdul Monem Sugar Refinery Ltd. (AMSRL) 2006-2007

04.          ERECTION & INSTALLATION OF COMBINED CYCLE POWER PLANT
               (Under Contract From Siemens In 2004-2005)

05.          FABRICATION & ERECTION OF BULK OIL STORAGE TANKS & UPGRADING WORKS OF REFINERY OF BANGLADESH EDIBLE OIL CO. LTD.
               (Under Contract From. Bangladesh Edible Oil Co. Ltd. in 2001 & 2002)

06.          FABRICATION & ERECTION OF EQUIPMENT FOR RESIN MANUFACTURING PLANT-
               (For Snehahish Ltd. In 2001)

07.          BARGE MOUNTED POWER PLANT (Under Contract From Mitsui Engineering & Shipbuilding Co. Ltd., Japan for Rural Power Co. Ltd. in 1998)

08.          NITROGEN STAINLESS STEEL REACTOR VESSEL
               (For Advanced Chemical Industries 1997)

09.          FABRICATION OF VESSELS & STORAGE TANKS (For WATA Chemicals Ltd. in 1996)

10.          FABRICATION OF LARGE DIAMETER PIPES & STAINLESS STEEL TANKS.
               (Under Contract From Techno Fochi, Italy for 90 MW Combined Cycle Power Plant in 1995)

11.       FABRICATION & ERECTION OF STEEL STRUCTURES, CONVEYOR & JETTY.
            (Under Contract From Mitsui Construction Co. Ltd., Japan for Karnaphuli Urea Fertilizer Co. Ltd. in 1995)

12.       STRUCTURAL STEEL, SAND BLASTING & PAINTING OF FLOATING TANK.(Under Contract From Techno of France for the Secondary Conversion Plant of Eastern Refinery Ltd. in 1993).

13.       FABRICATION AND ERECTION OF BULK EDIBLE OIL STORAGE TANKS.
             (Under Contract From Bangladesh Edible Oil Co. Ltd. in 1992)

14.       HORIZONTAL CONDENSATE TANKS
             (Under Contract From TRIPROGETTI. Italy for Titas Gas Transmission and Distribution Co. Ltd. in 1992)
15.       FABRICATION & ERECTION OF STEEL TEMPLATES
             (Under Contract From Chiyoda Corporation, Japan for Karnaphuli Fertilizer Project in 1991).

16.       FABRICATION & ERECTION OF RAILWAY WORKSHOP
             (Under Contract From Daewoo Corporation, South Korea for Bangladesh Railway in 1990)

17.       FABRICATION OF PRESSURE VESSELS & HEAT EXCHANGERS & FABRICATION & ERECTION OF DUCTS & STACKS
              (Under Contract From Mitsubishi Corporation, Japan for Jamuna Urea Fertilizer Project in 1990).

18.       STRUCTURAL STEELWORKS OF BUILDING &TOWERS  
            (Under Contract From Mitsubishi Corporation, Japan For Jamuna Urea Fertilizer project in 1989)

19.       WATER TREATMENT PLANT OF FERTILIZER COMPLEX
              (Under Contract From Kurita water Industries Ltd., Japan for Chittagong Urea Fertilizer Project in 1987)

20.       KAPTAI HYDROELECTRIC POWER PLANT
             (4th & 5th unit) – (Under Contract from Hitachi Zosen, Japan for Power Development Board in 1987)

21.       MULTIPURPOSE BERTHS OF CHITTAGONG PORT –
             (Under Contract from Interbeton b. v, Holland for Chittagong Port Authority in 1987)

22.       REVAMP OF CRUDE OIL HEATER.
             (Under Contract from C. E. Lummus of U.K for Eastern Refinery Ltd. In 1982)

LIST OF EQUIPMENT, MACHINERY & TOOLS OWNED BY HSHEC

A.      HEAVY LIFT & TRANSPORTATION

01.          Truck Mounted Mobile Crane
                Max Capacity 45 tons at 3.5m radius.

 02.         Truck Mounted Mobile Crane
               Max Capacity 23 tons at 3m radius; Boom length 31 m.

03.          Truck Mounted Mobile Crane
               Max Capacity 20 tons at 3m radius; Boom length 25m.

04.          2.5 Ton Hoist Crane
               Capacity 2.5 tons; Lift 8m; Span 16.5m

05.          Slipway Winch
               Max. Capacity 10 ton; Speed High- 10mm/min, Low-5mm/min, Drum Capacity- 290 x 500m

06.          Fork Lift Truck
               Load Capacity 2 ton, Load Centre- 500mm, Tire-Hard solid 2 Nos.

07.          Overhead Gantry Crane – 15 Tons Capacity.

B.        FABRICATION EQUIPMENT.

01.          Diesel Welding Set.
               Rated output – 10.5 kw. Current Range 40-350 A. Engine -Isuzu C240, 35/ 1800PS/RPM-12 nos.

02.          Semi – Auto Gas Cutter.
               Cutting Capacity 5-60mm, speed- 100-950 mm/min, 1/30 Hp, 10 Nos.

03.          Bending Roller.
                Max. Capacity Dia- 450 mm & upwards : Plate thickness max- 32 mm, Plate width 3050 mm. Hydraulically operated.

04.          1000 Tons Press.
                Capacity 1000 Ton, Stroke 1000 mm, Open Height 1700 mm, Table Area 4 x 1.8m Working Pressure 200kg/cm2 Hydraulically operated.

05.          Facing Machine width 6m.

06.          50 Ton Portable Press
                Horizontal Press Capacity 50 ton. Vertical press Capacity 20 ton. Max. Pressure 283 kg/cm2.

07.          Combined Shear & Punching Machine
               
Max. Capacity Punching 32 Dia x 15t, 27 Dia x 19t; Shearing = 16t x 250, Angle Steel 130 x 30 x 15mm Round Bar 45 Dia, Square Bar 40 x 40 mm.

08.          Bending Slab
               Dimension 2m x 3m x 250mm, Hole size 50 mm Dia, Hole Pitch 250 mm -6 Nos.
09.          Submerged Arc Welding Machine
               Current range 300-1250 A, Welding wire- 3.2 & 4.0 mm, Travel Speed- 15-150 cm/min.

10.          AC Welding Machine (500A)
               Secondary 500A, Current Range 50-300A, Electrode 3.2-8 mm dia-70 Nos.

11.          AC Arc Welding Machine (300A)
               Secondary- 300A, Current Range 50-300A, Electrode 2.0 – 6mm dia. 10 nos.

12.       D.C Arc Welding Machine MR300
            Current Range 10-300A, Arc Volt- 35V- 3 Nos.

13.       D.C Arc Welding Machine MR300
            Current Range 10-300A, Arc Volt- 35V- 3 Nos.

14.       Parallel Flame Cutter
            Plate Thickness- 12-32mm. Cutting Width- 27mm Cutting length- 65m, Cutting Speed- 100-1000mm/Min.

15.       Pipe Beveling Gas Cutting Machine
             – Upto 700 mm dia.

16.       Plasma Arc Cutter Cutting depth 10mm

17.       Air Compressor Unit Diesel operated 7 kg/cm2-5.Om3/min-2 Nos

18.       Air Compressor Unit Electrically driven 7 kg/cm2 – 8.5 m3/ min-3 Nos.

C.      WORKSHOP EQUIPMENT

01.       Universal Milling Machine
             Table size-1, 1000 x 280mm, long Travel 650mm, Cross Travel- 300mm Vertical Travel- 400mm, Spindle taper- NST50

02.       Bench Grinder.
             Wheel size, out Dia 300, Thickness 32 mm, Hole Dia 25, mm- 2 nos.

03.       Cut-Off Band saw Machine
             Max. Cutting Capacity

04.       Pipe Bender
            Max. Bending Capacity- 139.8x5mm Centre Former: 4 & 5 inches Dia.

05.       Pipe & Bolt Threading Machine Threading Capacity 1/2" -3

06.       Abrasive Cut- Off Machine Max. Capacity
            Wheel size 405 Dia. mm

07.       Ratchet Drophead Threader Threading Capacity- 14" -2"

08.       Cable Cutter
            Capacity Cable Cutter – 100 Dia Wire Cutter – 40 Dia.

09.       Lathe Machine
             Bed length- 16ft, Motor- 7.5HP

10.       Lathe Machine– 6"
            Bed length- 8ft, Motor- 4HP

11.       Lathe Machine– 8"
            Bed length- 6ft, Motor- 3HP

12.       Shaping Machine
            Stroke 18", Motor – 5 HP

13.       Plate Shearing Machine Length 2.5, cutting depth upto 10mm.

 

14.       Lathe Machine – 24"                                      –           1 No.
            Bed-12′-0′, Motor – 5.5 HP

15.       Lathe Machine – 10"                                      –           1 No.
             Bed-7′-0′, Motor – 3.5 H. P

16.       Nozzle Tester                                                  –           1 No.
            Wood Turning Lathe, Model : W-121.

17.       Elec. Circular Saw                                          –           1 No.
            PS. – 78, 185mm

18.       Torque Wrench                                             –           10 No.

19.       Impact Wrench                                              –           5 No.

20.       Ratchet Level Hoist.                                      –           1 No.
            Cap. 1,500 kg. – 10 sets.
            Cap. 3,000 kg. – 2 sets.

21.       Hydraulic Jack                                             –           10 No.
            Max. press- 700 kg/cm2, 20 ton                     –           20 Nos.

22.       Hydraulic Jack– 4 ton                                     –           7 Nos.

23.       Journal Jack Cap : 25 ton                               –           Nos.
           Cap : 20 ton                                                     –           19 Nos.

D.        STANDBY POWER GENERATION EQUIPMENT.
01.       600 KVA Diesel Generator
02.       350 KVA Diesel Generator
03.       125 KVA Diesel Generator
04.       60 KVA Diesel Generator
05.       40 KVA Diesel Generator

 

E.         SUB STATION EQUIPMENT

01.       1000 KVA 3 Phase Transformer 11 KV/ 380V

02.       500KVA 3 Phase Transformer 11 KV/ 380V

03.       150 KVA Transformer for lights

F.         TESTING EQUIPMENT.

01.       X-Ray Test Machine.

02.       Ultrasonic Thickness Tester

03.       Hydraulic Press Testing Pump max. 1000 kg/ cm2

04.       Paint thickness gauge (dry film)

G.         PAINTING & ABRASIVE CLEANING EQUIPMENT.

01.       Sand- Blasting Set complete with compressor, Tank, Hose, Etc. : 3 nos. 02. Spray Painting Sets :               5 nos.

03.       Airless Spray Equipment : 2 nos.